Get Keyword [Channel-Letter]; Getresults; Hardkey Button_Name; Table 3-1: Front Panel Button Names - Tektronix VM700T User Manual

get keyword
[channel-letter]

getresults

hardkey
button_name
VM700T Option 40/41/42 Audio Measurements User Manual
The command returns the configuration file value specified by keyword on
the channel specified by channel_letter. Refer to Get and Set Command
Keywords on page 3–5 for a list of the available keywords for the Audio
options. The channel_letters available are A, B, or C.
Example:
The above example returns the signal-to-noise ratio limits for channel A.
The command stores Measure or Auto mode measurement results in
default files in the Measurement~Results directory. In Measure mode, entering
with no argument(s) stores the measurement results for the current
measurement. If no measurement is currently being executed, the message
message
command to view the results.
Example:
The command indicates the press and release of the specified front
panel button, button_name. Using the
entering and
command should be used instead of these commands.
Example:
Front panel button names are listed in Table 3–1.
Table 3–1: Front Panel Button Names
A
Auto
Average
B
C
Copy
Remote Commands and Keywords
is returned. If a measurement is being executed, the
filename is returned. Use the
command is equivalent to
; however, in general the
Display
Freeze
Graticule
Help
Menu
MoveExpand
filename
Picture
SelectLine
Vector
Waveform
XY (Arrow selector)
3–3