Select Graph Submenu - Tektronix VM700T User Manual

Operating Basics
2–4
Limits: ON/OFF
files and measures against those limits. Limits OFF turns off
the limits levels.
CAUTION. When you disable the audio signal input limits, the audio input signal
is not checked against the limits that may have been selected during configura-
tion.
Rescale

Select Graph Submenu

Graph Levels
and phase differences.
NOTE. In Graph Levels mode, level difference limits are displayed in dB, but not
in volts.
Graph THD+N
THD+N, and phase differences.
Graph Ch. Sep.
on the driven (higher level) channel. Graph Separation mode
also let you view the incoming signal's level and phase
differences.
View Diff
right channels in dBu or volts and their phase difference in
degrees. This selection is available only when you select the
Graph Levels mode.
View Left
scale of the display increases to fill the display area.
View Right
vertical scale of the display increases to fill the display area.
View L & R
The vertical scale of each channel is reduced to fit the two
channels into the display area.
VM700T Option 40/41/42 Audio Measurements User Manual
displays the limits levels set up in the configure
the display to its default values.
mode measures and displays frequency, level,
mode measures and displays frequency, level,
mode measures THD + N only
displays the level difference between the left and
displays the left channel individually. The vertical
displays the right channel individually. The
permits viewing both channel is the same display.