Getting Started
1–8
create a file
select the existing file to be used as a template
name the file you created
edit the information in the new file as necessary
accept the edits
If the system default audio source file is acceptable, the VM700T will use this
file as it performs audio measurements (if it is the selected file). If you must
modify the audio source file, read the following paragraphs.
Editing the Audio Source File. To modify the Audio Source file, follow this
procedure:
1. Touch the
The query line (the top line of the display as seen in Figure 1–6) asks you to
select the file to be used as a template for your new file.
Ï Ï Ï
Ï Ï Ï
Ï Ï Ï
Figure 1–6: Selecting an Audio_Source file to use as a template
VM700T Option 40/41/42 Audio Measurements User Manual
soft key.