Connecting To A Source; Input Connector Pin Assignments; Figure 1-7: Cables And Connectors Supplied With Audio Option 40; Figure 1-8: Option 40 Connectors And Pin Assignments - Tektronix VM700T User Manual

Getting Started

Connecting to a Source

Input Connector Pin
Assignments
1–12
Refer to Option 41 and Option 42 beginning on page 2–29 for connecting Option
41 inputs to a signal source.
The VM700T Audio option is supplied with two male mini-XLR to female XLR
adapter cables wired as shown in Figure 1–7. The mini-XLR ends of these cables
connect the Audio option to an appropriate audio signal source.
Female XLR to male mini-XLR adapter cable
Figure 1–7: Cables and connectors supplied with Audio Option 40
Pin assignments for the Option 40 mini-XLR connectors are shown in Figure
1–8. These connectors are accessed at the VM700T rear panel.
Figure 1–8: Option 40 connectors and pin assignments
VM700T Option 40/41/42 Audio Measurements User Manual
+ 2 1
3
–
GND