Operating Basics
Audio Analyzer
VM700T Option 40/41/42 Audio Measurements User Manual
This section describes using the four measurements of Audio Option 40/41:
Audio Analyzer, Audio Monitor, Audio Spectrum, and View Audio Auto Test.
You may display the Audio option measurements by pressing the Measure button
and touching the
touching its soft key.
Figure 2–1 shows the Audio Analyzer display. The Audio Analyzer measures
and displays two channels of audio signal. The display plots frequency on the
x-axis and level in either volts or dBu (depending on your selection) on the
y-axis. Audio signal input limits may be selected at configuration and enabled or
disabled in the main Audio Analyzer menu (Limits: ON/OFF). When enabled,
the selected limits are shown in the displays.
Figure 2–1: The Audio Analyzer display (O.33 test sequence)
soft key. Select an Audio option measurement by
2–1