Table of Contents
Advertisement
Spectral ZP-5
6. DMX channel modes
With this menu, you can set the desired DMX channel mode (personality).
01) In the main menu, press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle between the following DMX channel modes:
14 channels
:
5 channels
:
6 channels
:
7 channels
:
4 channels
:
7. Edit Mode
With this menu, you can create your own custom shows.
01) In the main menu, press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose the desired custom program: PR.01 – PR.10.
04) Press the ENTER button to proceed to the scene choice. Each custom program has 30 scenes, which
can be edited.
05) Once you have chosen the desired scene, press the ENTER button to enter the settings.
06) Press the UP/DOWN buttons to toggle between RED, GREEN, BLUE, WHITE, ZOOM, STROBE, STEP TIME
and FADE options.
07) When the display shows RED, GREEN, BLUE and WHITE, press the ENTER button to open the menu and
press the UP/DOWN buttons to increase/decrease the LED brightness. The adjustment range is
between 0-255, from OFF to FULL ON.
08) When the display shows STROBE, press the ENTER button to open the menu and press the UP/DOWN
buttons to set the strobe frequency. The adjustment range is between 0-20, from OFF to high
frequency.
09) When the display shows ZOOM, press the ENTER button to open the menu and press the UP/DOWN
buttons to increase/decrease the zoom factor. The adjustment range is between 0-255, from OFF to
full zoom.
10) When the display shows TIME, press the ENTER button to open the menu and press the UP/DOWN
buttons to set the duration of a scene. The adjustment range is between 0-255, from 0 to 255
Ordercode: 43539
19 channels
:
8 channels
:
35 channels
:
13 channels
:
19 channels
:
17
.
.
Advertisement
Table of Contents
