Related Manuals for SHOWTEC Club Par Dizzy 3/8
Summary of Contents for SHOWTEC Club Par Dizzy 3/8
- Page 1 MANUAL ENGLISH Club Par Dizzy 3/8 Ordercode: 42653 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
Club Par Dizzy 3/8 Table of contents Warning ....................................2 Unpacking Instructions ..............................2 LED Expected Lifespan ..............................2 Safety Instructions ................................. 2 Operating Determinations ............................4 Rigging .................................... 4 Connection with the mains............................5 Return Procedure ................................6 Claims ....................................6 Description of the device .............................. -
Page 3: Warning
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: • Showtec Club Par Dizzy 3/8 • IEC power cable (1,75 m) •... - Page 4 ● If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
-
Page 5: Operating Determinations
When rigging, de-rigging or servicing the projector, always make sure, that the area below the installation site is secured and that there are not any unauthorized people around. The Club Par Dizzy 3/8 can be placed on a flat stage floor or mounted to any kind of truss with a clamp. Ordercode: 42653... -
Page 6: Connection With The Mains
Club Par Dizzy 3/8 Mounting a clamp to the Club Par Dizzy 3/8 Improper installation can cause serious injuries to people and/or damage of property ! Connection with the mains Connect the device to the mains with the power plug. -
Page 7: Return Procedure
Club Par Dizzy 3/8 Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. -
Page 8: Description Of The Device
Club Par Dizzy 3/8 Description of the device Features The Showtec Club Par Dizzy 3/8 is a light fixture with high output and great effects. ● 5 different control modes and various built-in programs ● RGB Wash ● UV Blacklight ●... -
Page 9: Overview
Club Par Dizzy 3/8 Overview Fig. 01 01) 18 x 0,5W RGB SMD LEDs 02) 3 x 8W 4-in-1 RGB+UV LEDs 03) IR Sensor 04) 27 x 0,5W Cool White SMD LEDs Ordercode: 42653... -
Page 10: Backside
Club Par Dizzy 3/8 Backside Fig. 02 05) LED display + control buttons 06) IEC power connector OUT 07) Mounting bracket with inclined screw 08) IEC power connector IN 09) Fuse T1L/250V 10) Cooling fan 11) Built-in microphone 12) Sound sensitivity control... -
Page 11: Control Modes
Club Par Dizzy 3/8 Control Modes There are 5 modes: Built-in programs Manual Mode Sound-controlled Master/Slave DMX-512 (3CH, 9CH) One Club Par Dizzy (Built-in programs, Manual mode) 01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation. -
Page 12: Multiple Club Par Dizzy's (Dmx Control)
Club Par Dizzy 3/8 Multiple Club Par Dizzy’s (DMX Control) 01) Fasten the effect light onto firm trussing. Leave at least 1 meter on all sides for air circulation. 02) Always use a safety cable (ordercode 70140 / 70141). 03) Plug the end of the electric mains power cord into a proper electric power supply socket. -
Page 13: Fixture Linking
Club Par Dizzy 3/8 Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows of two or more fixtures set to a master/slave operating mode. The combined number of channels required by all the fixtures on a serial data link determines the number of fixtures the data link can support. -
Page 14: Control Panel
Club Par Dizzy 3/8 Control Panel A) LED display Microphone C) MENU button D) UP button DOWN button ENTER button G) Sensitivity Fig. 05 Control Mode The fixtures are individually addressed on a data-link and connected to the controller. The fixtures respond to the DMX signal from the controller. (When you select the DMX address and save it, the controller will display the saved DMX address the next time.) -
Page 15: Menu Overview
Club Par Dizzy 3/8 Menu Overview Ordercode: 42653... -
Page 16: Main Menu Options
Club Par Dizzy 3/8 Main Menu Options Built-in Shows Sound-controlled Color Settings DMX-512 Mode Master/Slave Mode System Settings The Club Par Dizzy will only show its version number at start-up ! 1. Built-in Shows 01) Press the MENU button until the display shows 02) Press the ENTER button to enter the menu. -
Page 17: Color Settings
Club Par Dizzy 3/8 3. Color Settings 01) Press the UP and DOWN buttons until the display shows 02) Press the ENTER button to proceed. The display will show 03) Press the ENTER button to enter the edition mode. 04) Repeatedly press the ENTER button to toggle between the following color settings:... -
Page 18: System Settings
Club Par Dizzy 3/8 6. System Settings 01) Press the UP and DOWN buttons until the display shows 02) Press the ENTER button to enter the menu. 03) Repeatedly press the UP and DOWN buttons to toggle between the following system settings:... -
Page 19: Remote Control
Club Par Dizzy 3/8 Remote Control Button Function Description On / Off Switch the device ON or OFF Auto Mix Mode Repeatedly press the button to activate/deactivate Mix Auto (Wash/Beam/Laser/Strobe) programs (AM1-AM3) Sound-controlled Mix Mode Repeatedly press the button to activate/deactivate Mix... -
Page 20: Dmx Channels
Club Par Dizzy 3/8 DMX Channels 3 channel Channel 1 – Control Modes 6-30 Auto Program 1/Sound Program 1 31-55 Auto Program 2/Sound Program 2 56-80 Auto Program 3/Sound Program 3 81-105 Auto Program 4/Sound Program 4 106-130 Auto Program 5/Sound Program 5... - Page 21 Club Par Dizzy 3/8 182-197 Auto Program 4/Sound Program 4 198-213 Auto Program 5/Sound Program 5 214-229 Auto Program 6/Sound Program 6 230-245 Auto Program 7/Sound Program 7 246-255 Auto Program 8/Sound Program 8 Channel 7 – Strobe ( CH6 must be set between 6-133...
-
Page 22: Maintenance
Club Par Dizzy 3/8 Maintenance The Showtec Club Par Dizzy requires almost no maintenance. However, you should keep the unit clean. Otherwise, the fixture’s light-output will be significantly reduced. Disconnect the mains power supply and then wipe the cover with a damp cloth. Wipe the front glass panel clean with glass cleaner and a soft cloth. - Page 23 Club Par Dizzy 3/8 Problem Probable cause(s) Solution • Check if power is switched on and One or more No power to the fixture fixtures do not cables are plugged in function at all Primary fuse blown • Replace fuse Fixtures reset The controller is not connected.
-
Page 24: Product Specifications
Club Par Dizzy 3/8 Product Specifications Model Showtec Club Par Dizzy Input Voltage: 100~240VAC 50/60Hz Power consumption: Fuse: T1L/250V Dimensions: 264 x 214 x 77 mm (LxWxH) Weight: 1,1 kg Operation and Programming Signal pin OUT: pin 1 earth, pin 2 (-), pin 3 (+) -
Page 25: Dimensions
Club Par Dizzy 3/8 Dimensions Ordercode: 42653... -
Page 26: Notes
Club Par Dizzy 3/8 Notes Ordercode: 42653... - Page 27 Club Par Dizzy 3/8 Ordercode: 42653...
- Page 28 ©2019 Showtec...