Strobe Settings; Calibration; White Color Settings; Rgb Calibration - SHOWTEC Spectral ZP-5 Manual

Spectral ZP-5

8.8. Strobe Settings

With this menu you can choose the desired strobe mode.
01) Press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle between the following 2 options:
04) If you have chosen
following DMX channel modes/personalities: TOUR, AR2.S and TR16.

9. Calibration

With this menu, you can adjust the characteristics of the white color or set the RGB calibration.
01) In the main menu, press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Insert the password: UP>DOWN>UP>DOWN and press the ENTER button to confirm.
04) Press the UP/DOWN buttons to toggle between the following 3 options:

9.1. White color settings

With this menu you can adjust the temperature of the built-in white color presets.
01) When the display shows
02) Press the UP/DOWN buttons to choose one of the 11 white color presets:
03) Once you have chosen the desired preset, press the ENTER button to open the submenu.
04) Press the UP/DOWN buttons to toggle between RED, GREEN, BLUE and WHITE.
05) Press the ENTER button to open the desired color's brightness settings.
06) Press the UP/DOWN buttons to increase/decrease the color brightness. The adjustment range of
each color is between 0-255, from dark to brightest.

9.2. RGB calibration

With this menu you can adjust the temperature of the white color.
01) When the display shows
02) Now you can adjust the intensity of the RGB colors. Press the UP/DOWN buttons to toggle between
RED, GREEN and BLUE.
03) Press the ENTER button to open the desired color's brightness settings.
04) Press the UP/DOWN buttons to increase/decrease the color brightness. The adjustment range of
each color is between 0-255, from dark to brightest.

9.3. Calibration reset

01) When the display shows
02) Insert the password: UP>DOWN>UP>DOWN and press the ENTER button to confirm.
03) The settings, which you have previously adjusted, will have been reset and the display will show OK.
Ordercode: 43539
Classic strobe
Special strobe
, strobe will be active only if you operate the device in one of the
White settings
RGB calibration
Calibration reset
, press the ENTER button to open the menu.
, press the ENTER button to open the menu.
, press the ENTER button to open the menu.
.
20
.
.