Table of Contents
Advertisement
Spectral ZP-5
8.4. Color
With this menu, you can adjust the color calibration functions.
01) Press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle between the following 3 options:
04) When the display shows
displayed is the specific color which you have calibrated in CAL RGB.W menu.
05) When the display shows
and the output is the most powerful.
06) When the display shows
this way, different Spectral versions are color-balanced in order to match each other.
8.5. Dimmer
With this menu, you can adjust the dimmer.
01) Press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose one of the 4 dimmer speed options (DIM1-DIM4, from fast to
slow) and OFF.
04) If you choose OFF, then RGBW and the master dimmer are linear.
05) The dimmer settings do not have any influence on the device's performance in DMX TOUR mode.
The DMX settings override the dimmer settings.
8.6. Zoom presets
With this menu you can set the zoom position.
01) When the display shows
02) Press the UP/DOWN buttons to choose one of the 3 zoom presets:
8.7. DMX Error
With this menu, you can determine the device's behaviour in case of a DMX signal error.
01) Press the UP/DOWN buttons until the display shows
02) Press the UP/DOWN buttons to toggle between the 2 options:
03) If the display shows
04) If the display shows
ensure undisrupted performance.
Ordercode: 43539
RGB to White
Off
Adjusted output
, RGB to White is active. This means RGB = 255, 255, 255. The color
, the RGB settings are: 255, 255, 255. The RGB values are not adjusted
, the RGB output is adjusted to a standard preset universal color. In
, press the ENTER button to open the menu.
Blackout
DMX data save
, the Spectral will black the output out, in case of a DMX signal error.
, the Spectral will fall back on the last working DMX signal, which will
.
.
.
19
,
and
.
Advertisement
Table of Contents
