Table of Contents
Advertisement
EventMOVE 4/4
Main Menu Options
1. DMX address settings
With this menu you can set the desired DMX starting address.
01) Press the MODE button until the display shows
02) Press the UP/DOWN buttons to set the desired DMX address. The adjustment range is between
2. DMX channel modes
With this menu you can choose the desired DMX channel mode.
01) Press the MODE button until the display shows
02) Press the UP/DOWN buttons to choose one of the 3 channel modes: 6-channel mode, 8-channel
mode and 13-channel mode.
3. Wireless DMX
With this menu you can set wireless DMX signal support.
01) Press the MODE button until the display shows
02) Press the UP/DOWN buttons to choose between ON and OFF.
Ordercode: 44020
DMX address settings
DMX channel modes
Wireless DMX
Control modes
Manual mode (Static colors)
Master/Slave mode
Tilt settings
Display ON/OFF
Software version
Reset settings
Reset motors
.
14
.
.
.
Advertisement
Table of Contents
