Scan Operation; I Scan Types; I Com Band Scan; I Memory Scan - Icom IC-A24 Instruction Manual

IC-A24-Nocl.qxd 04.9.1 5:50 PM

I Scan types

The U.S.A. version has 3 scan types to suit your needs. The
non-U.S.A. versions have 2 scan types.
COM BAND SCAN
108.00 118.00
MHz MHz
Scan
Jump
MEMORY SCAN
non-TAG channel
Mch 2 Mch 4 Mch 6
Mch 1 Mch 7
non-TAG
channel
Mch 19 Mch 10 Mch 8
WEATHER CHANNEL SCAN
Repeatedly scans all "TAG" weather channels. Weather
channels are available for the U.S.A. version only.
Page 17

I COM band scan

q Push [CLR•DEL] to select the frequency mode.
w Push [SQL•
where noise is just muted.
e Push
Repeatedly scans
• When a signal is received, the scan pauses until it disappears.
136.975
• To change the scanning direction, rotate [DIAL].
all frequencies
MHz
r To stop the scan, push [CLR•
over the entire
COM band.

I Memory scan

q Push [MR•
w Push [SQL•
Repeatedly scans all
where noise is just muted.
"TAG" memory chan- e Push
nels. Used for checking • When a signal is received, the scan pauses until it disappears.
often-used channels • To change the scanning direction, rotate [DIAL].
r To stop the scan, push [CLR•
and bypassing usually
busy channels such as
control-tower frequen-
cies.

SCAN OPERATION

] to set the squelch level to the point
WX-ALERT
, then push [ANL• ] to start the scan.
SCAN
].
DEL
] to select memory mode.
MW
WX-ALERT ] to set the squelch level to the point
, then push [ANL• ] to start the scan.
SCAN
].
DEL
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
16