I Weather Channel Scan (U.s.a. Version Only); I "Tag" Channels - Icom IC-A24 Instruction Manual

IC-A24-Nocl.qxd 04.9.1 5:50 PM
5
SCAN OPERATION
I Weather channel scan
(U.S.A. version only)
q Push
, then push [ENT•
nel.
w Set squelch to the point where noise is just muted.
e Push
, then push [ANL•
• When a signal is received, the scan pauses until it disappears.
• To change the scanning direction, rotate [DIAL].
r To stop the scan, push [CLR•
17
Page 18
I "TAG" channel setting
Memory and weather channels* can be specified to be
skipped for the memory and weather channel* scans respec-
WX ] to select a weather chan-
tively. The "TAG" channel function is only available during
scan operation.
SCAN ] to start the scan.
].
DEL
Memory channel 15 is
scanned during memory
scan.
q Push [MR•
w Select the desired memory channel to be a "TAG" chan-
e Push
r To cancel the "TAG" setting, repeat above steps.
Push then
Appears the "TAG" indicator.
Memory channel 15 is
skipped during scan.
] to select memory mode; or, push
MW
push [ENT• WX ] to select a weather channel.*
nel.
, then push [9• TAG ] to set a "TAG."
• "TAG" appears.
• Non-"TAG" channels are skipped during scan.
*Weather channel: U.S.A. version only.
, then