Post-Assembly Checks; Assembly References - Goulds Pumps 3700 Installation, Operation And Maintenance Manual

8. Reinstall the coupling spacer, coupling guard, auxiliary piping, tubing, and equipment that
was removed during preparation for disassembly.
9. Lubricate the bearings.

Post-assembly checks

Perform these checks after you assemble the pump, then continue with pump startup:
• Rotate the shaft by hand in order to make sure that it rotates easily and smoothly and that
there is no rubbing.
• Open the isolation valves and check the pump for leaks.

Assembly references

Maximum torque values for fasteners
About this table
The torque values specified in this table are for dry threads. These values should be reduced
for lubricated threads only when lubricants of high stress ability, such as Molycote, are used.
Materials listed in this table are equal to the respective API 610, 10th Edition material classes.
In some cases, superior materials are substituted.
Construction - API designation
The following API designations apply to this table:
• S-1
• S-3
• S-4
• S-5
• S-6
• S-8
• S-8N
• S-9
• C-6
• A-8
• A-8N
• D-1
• Modified A-8 (non-API material)
Model 3700, API Type OH2 / ISO 13709 1st and 2nd Ed. / API 610 8/9/10/11th Ed. Installation, Operation, and Maintenance
Manual
Maintenance
107