Goulds Pumps 3700 Installation, Operation And Maintenance Manual page 92

Maintenance
f)
119A
123
228
360
370P
Figure 67: Bearing frame
3. Press the radial INPRO oil seal into the radial end cover.
4. Install the radial-bearing end cover and new end-cover gasket on the bearing frame.
Make sure that the expulsion part is at the 6 o'clock position and is properly seated.
For the optional air-cooling package, the radial-heat flinger replaces the standard radial
INPRO.
5. Perform the following based on your pump version:
If your pump is... Then...
SA or MA
90 Model 3700, API Type OH2 / ISO 13709 1st and 2nd Ed. / API 610 8/9/10/11th Ed. Installation, Operation, and Maintenance
Coat the internal bearing surfaces with lubricant to be used in service.
Press the radial INPRO oil seal into the bearing frame and make sure that the
expulsion part is at the 6 o'clock position and is properly seated.
Thrust end cover
Deflector
Bearing frame
Radial-bearing end-cover gasket
Bearing-frame screws
Manual