If your pump is... Then...
SX, MX, LA, LX,
XLA, XLX, or XXL
123
228
Figure 68: Radial INPRO oil seal installation
6. Assemble the shaft assembly and bearing frame:
a) Coat the outer races of the bearings with a compatible oil.
b) Coat the internal bearing surfaces of the bearing frame with a compatible oil.
Model 3700, API Type OH2 / ISO 13709 1st and 2nd Ed. / API 610 8/9/10/11th Ed. Installation, Operation, and Maintenance
Manual
Install and tighten the radial-end cover bolt and bearing-frame screws evenly to
the torque values shown in the Maximum torque values for 3700 fasteners table.
Radial INPRO oil seal
Bearing frame
Maintenance
91