Maintenance Unit (M-Unit Pda) - Kaba E-Plex 5900 User Manual

Card connect lock
Hide thumbs Also See for E-Plex 5900:
Table of Contents

Advertisement

14. Maintenance unit (M-Unit PDA)

The E-Plex 5900 M-Unit is a Windows Mobile 5.0 compatible handheld PDA running Kaba's E-5900 M-Unit
software. The M-Unit is utilized for occasional interaction with the locks on-site and day to day operation of the lock
is possible without the M-Unit. Please refer to the "Appendix" section at the end of this document on how to install
the "E-Plex 5900 M-Unit" software application on your Windows Mobile PDA.
The E-Plex 5900 M-Unit can be used to perform the following functions:
Setting Date/Time Parameters
Setting Communications Key
Updating Lock Firmware
Performing Lock Diagnostics
Important: The communication between the lock and the PDA is via the IrDA (infra-red) interface. Hold and point
the M-Unit to the lock so that the small dark red infra-red glass windows of both devices face each other straight at
a distance of between 4 and 8 inches for successful communication – see the picture on the right below.
These functions are all available from the main M-Unit program menu, displayed when the application is run:
15
15/37

Advertisement

Table of Contents
loading

Table of Contents