Table of Contents
Advertisement
2.2
If the lock is configured for PIN and card:
o
o
2.3
Present a user card having 'maintenance
unit' privilege to the lock
2.4
Enter communication mode by typing:
o
2.5
Skip to step 3
3
Start bootloader upload
1
On the maintenance unit press 'Send
bootloader'
Kaba Access Control Tech Support
Phone: 800-849-8324, or 336-725-1331 x400
(Monday through Friday, 8 AM to 5 PM EST)
Type in PIN
Press '#' key
900#
www.kabaaccess.com
25
Without the privilege, access will be denied.
If programming mode is entered, the green
led turns on along with a high pitch sound.
The green led blinks with high pitch sound to
confirm and then red and green blink in
sequence to indicate communication mode
is activated.
The communication with the maintenance
unit must be established within 15 seconds
Bootloader update takes a few seconds to
complete. The progress bar will display how
much data is transferred.
Once completed, a 'done' message will be
displayed on the maintenance unit.. The
lock is ready for use.
25/37
Advertisement
Table of Contents
