Table of Contents
Advertisement
2
Present the admin card to the lock
3
Exit keypad programming mode
1
Press '#' key
admin card.
Once the lock reads and processes the card,
the green led will turn on with a high pitch
sound indicating success.
[After exiting the keypad programming mode
as shown on the next step, the lock now
goes back to (user credential) access mode.
A valid ISO 14443A DESFire user card will
now operate the lock].
Either exit pressing the '#' key or leave the
lock idle for five seconds. In the latter case,
the red led turns on with a low pitch sound to
indicate a timeout.
Green led blinks with high pitch sound
22
22/37
Advertisement
Table of Contents
