Kaba E-Plex 5 Series Installation
Kaba E-Plex 5 Series Installation

Kaba E-Plex 5 Series Installation

Egress monitoring installation addendum

Advertisement

E-Plex
5xxx Series
®
Egress Monitoring Installation Addendum

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the E-Plex 5 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Kaba E-Plex 5 Series

  • Page 1 E-Plex 5xxx Series ® Egress Monitoring Installation Addendum...
  • Page 2 Kaba’s E-Plex 5900 door lock will monitor opening and closing of the door. This is accomplished by installing a position sensor in the door, and installing a permanent magnet in the door frame. These are shown in the pages that follow.
  • Page 3 Route the wires through the door. It is important to ensure that each wire from the sensor is connected to a wire extending from the lock housing. Polarity is not required. Insulate the junctions. Refer to the Wire Connections at the left. Egress Sensor and Wire Outside...
  • Page 4 Kaba Access Control 2941 Indiana Avenue Winston-Salem, NC 27105 USA Tel: (800) 849-8324 (336) 725-1331 Fax: (800) 346-9640 (336) 725-3269 For Technical Assistance Tel: 1-800-849-TECH (336) 725-1331 www.kabaaccess.com PKG3235 0308...

This manual is also suitable for:

E-plex 5900

Table of Contents