Bottom Hardware And Miscellaneous Parts - Keysight N5221A Service Manual

PNA Series Microwave Network Analyzers
N5221A/22A

Bottom Hardware and Miscellaneous Parts

Reference
Designator Part Number
0515-0372
1
0515-2994
2
0515-1410
3
0515-0374
4
N5242-20103
5
6
N5242-00007
0515-0430
7
N5242-00006
8
N5242-00011
9
0515-1227
10
0460-2725
11
5022-1087
12
E4403-20033
13
0403-0285
0960-0055
14
0515-1521
15
N5221-00005
16
N5227-00001
N5221-00006
17
N5221-00007
N5242-00005
18
N5242-00019
19
1810-0118
20
0515-0669
21
1250-3805
22
Service Guide N5222-90001
Qty Description
Machine screw, M3.0 x 8, pan head (4 to attach A19 test set motherboard to
test set deck, 6 to attach A19 test set motherboard to stabilizer bracket, 4 to
attach stabilizer bracket to A20 IF mux board, 17 to attach test set deck to
chassis, 4 to attach A23–A24 mixer bricks to bottom of mixer brick mounting
66 block, 4 to attach A21 HMA26.5 to its mounting bracket, 8 to attach A34–A37
source attenuators to their brackets, 8 to attach A42–A45 receiver attenuators
to their brackets, 4 to attach A33 reference mixer switch to its bracket, 3 to
attach reference mixer switch bracket to test set deck, and 4 to attach test set
front sub panel to test set deck front.)
Machine screw M3.0 x 14 (2 to attach splitter to top of mixer brick mounting
10
block and 8 to attach A38–A41 bias tees to their brackets.)
Machine screw M3.0 x 20 pan head (6 to attach mixer bricks to sides of mixer
16
brick mounting block, 8 to attach A25–A28 receiver couplers to their mounting
brackets.)
4 Machine screw M3.0 x 10 pan head (To attach mixer brick mounting block.)
1
Mounting block (For A23 and A24 mixer bricks.)
Bracket (For A34–A37 source attenuators, A39–A41 bias tees, and A42–A45
1
receiver attenuators.)
Machine screw M3.0 x 6 pan head (8 to attach receiver coupler brackets to test
30
set deck, 12 to attach attenuator brackets to test set deck, 8 to attach switch
brackets to test set deck, and 2 to attach HMA26.5 bracket to test set deck.)
4
Bracket (For A25–A28 receiver couplers.)
1
Bracket (For A33 reference mixer switch.)
4 Machine screw, M3.0 x 6, flat head (To attach test set front sub panel)
2 Vibration mount (4-port only; between couplers 1 and 3, and 2 and 4)
4 Test port coupler dress nut (One for each coupler.)
4
Gap pad; 4-port (Between each coupler and test set front sub panel.)
2
Coupler bumper; 2-port (Between each coupler and test set front sub panel.)
2
Termination, male SMA short circuit
4
Machine screw, M3.0 x 5, flat head (To attach front panel LED boards.)
1
Test set deck
Test set front sub panel, 2-port models without front panel jumpers
1
Test set front sub panel, 2-port models with front panel jumpers
1
Test set front sub panel, all 4-port models
1
Bracket (For A21 HMA26.5.)
1
Stabilizer bracket (Between A19 test set motherboard and A20 IF mux board.)
2
Termination, 50-ohm load (For J6 and J7.)
4 Machine screw, M4.0 x 0.7, pan head (To attach A20 IF MUX to test set deck.
12- Bulkhead connector, f-f, PC 3.5, 50-ohm; includes hex nut and washer (Qty 12
24 for options 201, 217, and 219; qty 24 for options 401, 417, and 419.)
Replaceable Parts
Replaceable Parts Listings
6-89