Hayward ProLogic Troubleshooting Manual page 11

How To: Set a Pump Schedule
Follow these steps to program your pump to turn ON & OFF automatically through the
Step 1
Press the 'Menu' repeatedly, until 'Timers Menu' appears on the
Step 3
Use the plus (+) key or the minus (-) to adjust the start time (left
side), then press the (>) once to get to the stop time.
NOTE: The 'T' in 'Filter T1' stands for time window, there are up to four of these for the pool in a PL-PS
system. IF a variable speed pump is being used go to the next page to learn how to set the pump
11
Timer's Menu.
display.
operation percentage for each timer.
Step 2
Press the (>) until 'Filter T1,T2,T3,T4' or 'Spa-all' appears on the
display (depending on which schedule you wish to program).
Step 4
Use the plus (+) key or the minus (-) to adjust the stop time.
Repeat Steps 2-3 for all desired schedules.