Hayward ProLogic Troubleshooting Manual page 28

6. Auxiliary Equipment Inactive (cont.)
Service mode suspends all automation, including schedules, equipment protections
and set point limitations.
Equipment running/on in service?
Step 6C
While in service mode: IF the equipment wired to the
relay in question does not run/turn on, then there is
likely a problem with that piece of equipment. IF
running/on, then exit service & attempt to manually
turn Auxiliary ON. After pressing the button the system
should explain any interlocks or preventions. Contact
service for additional assistance (908)355.7995.
28