Hayward ProLogic Troubleshooting Manual page 9

How To: Adjust Heater Set Points
Follow these steps to adjust the Heater set points through your ProLogic system.
Step 1
Step 2
Press the 'Menu' repeatedly, until 'Settings Menu' appears on Press the (>) repeatedly, until 'Spa Heater' or 'Pool Heater'
the display. appears on the display.
Step 3 Step 4
Repeat Steps 2-3 for all applicable bodies of water, then press
Use the plus (+) key to increase, or the minus (-) key to decrease
the temperature set point. the 'MENU' button four times to return to the 'Default Menu'.
NOTE: If the heater is not wired through the ProLogic then it will need to be adjusted directly on the
Heater instead of through the ProLogic system.
9