Auxiliary Equipment Inactive - Hayward ProLogic Troubleshooting Manual

Hide thumbs Also See for ProLogic:

Table of Contents

6. Auxiliary Equipment Inactive

The ProLogic should only attempt to turn on wired equipment if the LED next to the

specific auxiliary or valve is illuminated.

Inspect relay LED

Service mode

Step 6A

Step 6B

The ProLogic will only attempt to engage a relay if the

Activate service mode & press the relay button. IF the

specific Auxiliary LED is illuminated on the display.

LED illuminates, a control related feature is overriding

Press the Auxiliary button that corresponds with the

the relay (example: interlock...etc.), go to step 6C. IF

relay in question. IF the relay LED fails to turn ON,

LED does not turn ON contact a pool professional by

proceed to step 6B. IF ON, jump ahead to step 6C for

visiting:

https://www.hayward-

more information.

pool.com/shop/en/pools/Dealer-Locator

Table of Contents

Show Quick Links

Table of Contents