No Cell Power/Low Volts - Hayward ProLogic Troubleshooting Manual

1. No Cell Power/Cell Power Error/Low Volts
These messages all imply that the chlorinator cycle has been interrupted due to
no/low voltage detected when the cell power was turned on. Please add liquid
chlorine to the pool until the issue has been resolved.
Please contact a technician
Step 1A
STOP: This must be resolved by a certified technician. Please contact
tech service: (908) 355-7995 OR contact a pool professional:
https://www.hayward-pool.com/shop/en/pools/Dealer-Locator
NOTE: These reported errors DO NOT indicate that there is a problem with the turbo cell. However,
it is recommended to clean the cell, if it is calcified, before scheduling service repairs. Cell cleaning
instructions may be found on pg. 13-15)
17