Bay Configuration Engineering - ABB 650 series ANSI Engineering Manual

Section 6
Local HMI engineering
6.2.3
86
IEC Symbol Name
Breaker2 indication only, 11 =
Undefined
Static text
Dynamic text
Select button, 00 = Middle
position
Select button, 01 = Open
Select button, 10 = Closed
Select button, 11 = Undefined
Indication button, 00 = Middle
position
Indication button, 01 = Open
Indication button, 10 = Closed
Indication button, 11 = Undefined

Bay configuration engineering

A page with a single line diagram and measurements contains active living objects.
The object values are updated by the IED periodically (measurement) or in case of an
event. Once the symbols are placed on the HMI page they must be linked to the
corresponding function block in the application configuration, which protects or
controls the object that the symbol on the HMI page represents.
Creating a complete HMI display page
Procedure:
1. Make a sketch how to present the single line diagram.
2. Place the apparatus, transformer and other symbols that are needed for the single
line diagram into the raster boxes.
3. Add connection points where needed.
Node Type IEC Symbol ANSI Y32.2/
Definitions
35
0
29
30
30
30
30
31
31
31
31
1MRK 511 245-UUS -
Category
IEEE 315
Symbol
Definitions
Switchgear
Texts
Texts
Texts
Texts
Texts
Texts
Texts
Texts
Texts
Texts
650 series ANSI
Engineering Manual