Table of Contents
Advertisement
1MRK 511 245-UUS -
650 series ANSI
Engineering Manual
IEC09000357-1-en.vsd
IEC09000357 V1 EN
Figure 8:
Select the TCP/IP protocol and open Properties
4.
Select Obtain an IP address automatically if the parameter DHCPServer is set
to Enabled in the IED.
IEC09000358 V1 EN
Figure 9:
Select: Obtain an IP address automatically
5.
Select Use the following IP address and define IP address and Subnet mask if the
front port is used and if the IP address is not set to be obtained automatically by
the IED, see
Figure
chosen for the IED.
IEC09000358-1-en.vsd
10. The IP address must be different from the IP address
Section 4
Setting up a project
31
Advertisement
Table of Contents
