Table of Contents
Advertisement
1MRK 511 245-UUS -
650 series ANSI
Engineering Manual
Inserting an IED from the template library
An IED in the plant structure can be exported as a template (*.pcmt). The user can
build up a template library with all the exported IED templates. It is possible to insert
an IED from the template library to create a new IED in the plant structure. Change the
IP address, the name and the technical key that corresponds to the physical IED after a
template IED has been imported.
A template IED can only be inserted when the bay is selected in the
plant structure.
Procedure to insert a template IED
1.
Right-click the Bay in the plant structure.
2.
Select New and Create from Template ... to open the Create New Object from
Template window, see
IEC08000366 V1 EN
Figure 23:
PCM600: Selecting IED from template library
3.
Select the IED from the list of available IEDs.
4.
Click the icon in the right column of the list of available templates to open the
Template Properties. Verify the template information, see
Close to close the window.
Figure
23.
Section 4
Setting up a project
IEC08000366.vsd
Figure 24
and click
45
Advertisement
Table of Contents
