ABB 650 series ANSI Engineering Manual page 52

Section 4
Setting up a project
46
IEC08000367 V1 EN
Figure 24: PCM600: IED Template Properties
5. Click Delete Template to delete the template, click Import Template to import a
template from the selection window or click Create to insert the selected IED to
the bay, see Figure 23.
It is possible to insert more than one IED from the Create New
Object from Template window and the selection window remains
open until the user clicks Close.
Inserting a configured IED in 650 series
Configured IEDs in 650 series in PCM600 are available as *.pcmi files and include all
information that is related to the IED object in PCM600. The configured IEDs in 650
series is bound to a specific hardware configuration. Configured IEDs in 650 series are
available on the Connpack DVD as .pcmi files under the file named User documentation.
Two alternatives to insert configured IEDs in 650 series:
• Use the configured IEDs in 650 series that has been ordered together with the IED.
• Create an own configuration, export the configuration as *.pcmi file and use it to
configure other IEDs.
1MRK 511 245-UUS -
IEC08000367.vsd
650 series ANSI
Engineering Manual