Table of Contents
Advertisement
1MRK 511 245-UUS -
650 series ANSI
Engineering Manual
•
Description of the substation part including the used logical nodes
•
Description of the IEDs with their logical nodes
•
Description of the communication network
•
Description of the engineering process
For more details please refer to the IEC 61850 standards. In the following description it
is assumed that PCM600 together with CCT600 is used as system configuration tool.
A short form of a typical sequence is shown in
exported as a SCD file.
1.
Export SCL files from PCM600. In the scenario in
Other SCL file types are possible to export.
2.
Configure horizontal and vertical communication in the station configuration tool,
for example CCT600.
3.
Import SCL files to PCM600 project. In the scenario in
SCD file.
è
è
SCD file
è
è
è
è
PCM600 (1)
do IED engineering
è
è
export SCD file
IEC08000413 V1 EN
Figure 62:
IEC 61850: Signal engineering procedure flow
IEC 61850 communication engineering
Figure 62
CCT600 (2)
create project
import SCD file
configure data sets
configure Report CBs
configure GOOSE CBs
export SCD file
è
import SCD file
è
link GOOSE input data
è
Write to IED
IED 1
IED 2
Section 7
when a complete station is
Figure 62
it is a SCD file.
Figure 62
it is the updated
SCD file
PCM600 (3)
IED n-1
IED n
IEC08000413.vsd
97
Advertisement
Table of Contents
