ABB 650 series ANSI Engineering Manual page 30

Section 3
Engineering process
24
Save the work
between the
different steps
Supported
protocols
Signal engineering
CMT
Write configuration
to IED
IED
WRITE
End
IEC08000122 V1 EN
Figure 4: IED engineering workflow
The described sequence in
dependencies of the steps. It is possible to do a different sequence based on the
available information at the time the project is started. This means that several
iterations may be needed to finish the project.
• Setting up the PCM600 project
Start
Create plant structure
Project
Optional, can be used to add
additional hardware modules
HWT
ACT/
Configure IED functionality
SMT
Parametrization
PST
Create Single line diagram
for local HMI
GDE
IEC61850
Export SCL files from
Export
PCM600
SCD
Import SCL files to CCT600
and do signal engineering.
CCT600
Export SCL files from
CCT600.
Import
Import SCL files to PCM600
SCD
Make GOOSE connections
SMT
Write configuration
IED
to IED
WRITE
End
Figure 4 is a proposal based on practical experience and
1MRK 511 245-UUS -
IEC08000122.vsd
650 series ANSI
Engineering Manual