Table of Contents
Advertisement
1MRK 511 245-UUS -
Section 5
5.1
5.1.1
650 series ANSI
Engineering Manual
Protection and control engineering
Creating an application configuration with ACT
Overview
ACT is used to create the application configuration for an IED. The application
configuration is built up with function blocks.
Function blocks are dedicated for different functionality, for example:
•
Preprocessing blocks
•
Control related functions
•
Protection related functions
•
Monitoring functions
•
Communication
For detailed information about function blocks see the technical manual
and the application manual.
Some function blocks are mapped as logical nodes according to the IEC 61850
standard. See the IEC 61850 communication protocol manual for detailed information.
Other function blocks are not mapped as logical nodes, for example:
•
Logical gates
•
Timers
The basic general features of the Application configuration tool ACT:
•
Organization of an application configuration
•
Organize an application configuration into a number of logical parts
(MainApplication).
•
Organize a MainApplication over a number of pages.
•
Features to program an application configuration:
•
Insert function blocks, make connections and create variables.
•
Include the hardware IO channels directly in the application configuration.
•
Set function blocks and signal visibility to SMT and PST.
Protection and control engineering
Section 5
53
Advertisement
Table of Contents
