ABB 650 series ANSI Engineering Manual page 42

Section 4
Setting up a project
36
For all practical engineering purposes (both towards the IED and towards the 61850
engineering process), the user should keep the default SCL technical key. It is however
possible, due to for example company naming policies, to rename the SCL technical
key for the station level, voltage level, bay level and IED level using the Object
properties window as shown in
• The station level has been renamed as "DMSTAT"
• The voltage level has been renamed as "C1"
• The bay level has been renamed as "Q1"
• The IED has been renamed as "SB1"
The renamed full path name of the technical key for the IED would be
DMSTATC1Q1SB1.
IEC08000374 V1 EN
Figure 13: PCM600: IEC 61850 signal designation concept
Figure 13.
IEC08000374.vsd
1MRK 511 245-UUS -
650 series ANSI
Engineering Manual