Overview Of The Electrical Connectors And Fuses - ferrotec CARRERA Operation Manual

High Voltage Power Supply
Type: CARRERA
5.5.3

Overview of the electrical connectors and fuses

Fig. 7 Overview of electrical connectors and fuses
Version 1.3_15 EN
5 4
The electric connectors and fuses are found on the rear panel of
the high-voltage power supply unit..
Fuses
1 Main fuse block F301 (mains supply line)
Electrical connectors
2 Earthing screw X300
3 Mains connector X301 (Harting plug)
Connection between the mains supply and the high-voltage
power supply unit
4 Control line analog output X302
Connection between the high-voltage power supply unit and
the control unit
5 Control line digital output X303
Connection between the high-voltage power supply unit and
the control unit
6 Interlock X305 for the connection of an external fuse chain.
7 High-voltage output X306 to X309
Connection between the high-voltage power supply unit and
the filament power supply
The outputs are installed in accordance with the order. The
internal arrangement of the connectors is parallel while the fuses
are installed in series. Unused connectors must be bridged with
blind flanges to prevent the possibility of switching high voltage
on (see chapter 3.2).
7 6
2 3 1
34