Intended Use - ferrotec CARRERA Operation Manual

High Voltage Power Supply
Type: CARRERA
2.2

Intended Use

Version 1.3_15 EN
The high voltage power supply HVP is part of a group of devices
for the operation of an electron beam evaporator installed in a
vacuum chamber..
The group of devices consists of:
- High voltage power supply (HVP)
- Electron beam evaporator controller GENIUS with integrated
remote control
- Filament power supply (FPS)
- Grounding rod
Use of the high voltage power supply for any other purpose
requires the approval of the manufacturer.
The high voltage power supply HVP generates the high voltage
needed to operate an electron beam evaporator. Other fields of
application are only permitted with the written authorization of the
manufacturer.
This operating manual deals solely with the design and operation
of the high voltage power supply. Please see the relevant
operating manuals for operation of the other devices in the group
(see table of contents and figures, appendices 1 + 2).
These devices were developed, designed and built solely for
commercial/industrial use.
The high voltage power supply HVP is intended solely for the
purpose described above. Any other use or modification of the
high voltage power supply HVP without the written consent of
the manufacturer is deemed improper. The manufacturer
accepts no liability for resultant damage. The risk is borne
solely by the operator.
The high voltage power supply HVP may only be put into
operation when it has been ensured that all safety equipment is
operative and the total installation of the vacuum system
comply with EU directives.
DANGER
7