Operating Areas And Danger Zones At The Machines - ferrotec CARRERA Operation Manual

High Voltage Power Supply
Type: CARRERA
4.2

Operating Areas and Danger Zones at the Machines

Version 1.3_15 EN
The operating area is defined by the operator (overall plant).
The danger zone during adjustment and maintenance work is
the immediate area around the high voltage power supply.
The danger zone during adjustment, maintenance and repair
work extends 1 m around the electron beam evaporator. The
area needed to open the switch cabinet doors must be taken
into account.
Keep the danger zone around the machine free of objects. Lay
cables in such a way that they cannot be tripped over!
The operator must ensure that access to the danger zones by
unauthorised persons is prevented..
The danger zones may only be entered for cleaning,
maintenance and repair work by skilled personnel under
compliance with applicable safety regulations.
WARNING
24