ferrotec CARRERA Operation Manual page 51

High Voltage Power Supply
Type: CARRERA
Version 1.3_15 EN
Replacement of the filter mat
The air that is suctioned by the fan passes through a filter mat
that catches dust particles. This filter mat should be replaced
every 6 months. The cleaning intervals must be adapted to the
ambient conditions
Please note that regular replacement of the filter mat is
necessary as dust deposits in the inner space of the high-
voltage power supply unit can cause flashovers.
If you operate the high-voltage power supply unit without a filter
mat, you should send the unit regularly to the FERROTEC GmbH
Company for cleaning.
Before you start replacing the filter mat you must switch high
voltage off Carry out the switching-off procedure (see Chapter
8.).
Proceed as follows:
1. Draw the filter element out of the device towards the front.
2. Replace the filter mat with a new one.
3. Insert the filter element back into the unit.
The filter element (part no. 1-90 00 69) can be ordered from the
FERROTEC GmbH Company.
NOTICE
DANGER
NOTICE
50