Harting Plug, Connector Assignment Of The Power Supply Cable - ferrotec CARRERA Operation Manual

High Voltage Power Supply
Type: CARRERA
400 Volt Version
N L3(R) L2(S) L1(T) PE(GND)
Fig. 9 Harting plug, connector assignment of the power supply cable
Version 1.3_15 EN
Main supply line
The mains supply line is used to connect the high-voltage power
supply unit to the mains.
1. Connect the mains supply line with the Harting plug to the
X301 connector.
First make sure whether the mains supply line is without
voltage.
2. Connect the mains supply line with the Harting plug to the
X301 connector.
L1(R)
DANGER
208 Volt Version
L2(S) L3(T) PE(GND)
38