Complete Daily Cleaning - ferrotec CARRERA Operation Manual

High Voltage Power Supply
Type: CARRERA
8.1

Complete Daily Cleaning

8.2 Cleaning
8.3 Maintenance
Version 1.3_15 EN
The shutdown procedure must be followed before any cleaning,
maintenance or repair work is carried out (see chap. 4.5).
Do not use sharp objects or tools to clean the machine unless
they are explicitly intended for this purpose.
Clean the front panel with a wet piece of cloth once a month.
Do not use any aggressive cleaning agents and sharp objects.
Proceed in such a way that no water can get into the high-
voltage power supply unit.
During maintenance work pay attention to the dangers from
electric current!
In the case of the high-voltage power supply unit the
maintenance and cleaning work is only limited to:
- Cleaning of the housing; and
- Replacement of the filter mat at the air inlet.
If there is a need of other maintenance work, please, contact
the FERROTEC GmbH Company.
DANGER
NOTICE
DANGER
NOTICE
48