1+1 Lag Mib Tables - Alcatel-Lucent 1675 Reference Manual

Lambdaunite multiservice switch
Hide thumbs Also See for 1675:
Table of Contents

Advertisement

ES64U SNMP MIB description
...................................................................................................................................................................................................................................

1+1 LAG MIB tables

MIB field name
alclnkaggAggPortIndex
alclnkaggAggPortActorSystemPriority
alclnkaggAggPortActorSystemID
alclnkaggAggPortActorAdminKey
alclnkaggAggPortActorOperKey
alclnkaggAggPortPartnerAdminKey
alclnkaggAggPortPartnerOperKey
alclnkaggAggPortSelectedAggID
...................................................................................................................................................................................................................................
1-84
alclnkaggAggPortTable
Description
Index of the table
Priority value of the system. Inherited from
the
alclnkaggAggActorSystemPriority
value.
ode MAC address
The current administrative value of the
Key for the Aggregation Port.
Administrative value of Actor aggregation
port
Administrative value of the Key for the
partner port.
Operational value of the Key for the
partner port
The identifier value of the Aggregator that
this Aggregation Port has currently
selected. Zero indicates that the
Aggregation Port has not selected an
Aggregator. When this field is not zero and
lacp is on the port receives and transmit
LACP frames. When this field is not zero
and lacp is off it just means that port is
setup to Be port of that LAG.
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
1+1 LAG - Link Aggregation management
(ETS MIB)
Read-Only
In use only when LACP is enabled
Default value: 32784
Read-Only
This is a 16-bit read-write value.
Can only be set if the port ifAdminStatus
is Down.
Read-Only
16-bit value
In use only when LACP is enabled.
Default value: 0
Read-Only
In use only when LACP is enabled.
Default value: 0
Read-Only
In use only when LACP is enabled.
Default value: 0
Read-Only
Default value: 0
1+1 LAG MIB tables
Value
365-374-201R11.1.1
Issue 1 March 2010

Advertisement

Table of Contents
loading

Table of Contents