Alcatel-Lucent 1675 Reference Manual page 74

ES64U SNMP MIB description
...................................................................................................................................................................................................................................
1 GetTable
...................................................................................................................................................................................................................................
1-62
I ARG OpticsIMCsgVar::CsgVar::OID: tableOid = OPTICSIM-ETHPM-MIB:: ethAggrHDTxTable
OUT ARG OpticIMCsgVar::AttrList:
•
– AttrVal.instance[0] = interface ifIndex (Ethernet type index from ifTable)
– AttrVal.instance[1] = ethAggrHDTxGranularityPeriod (1=15 minutes 2=24 hours)
– AttrVal.instance[2] = ethAggrHDTxPeriodEndtime (timeticks since 1970 while the end of
interval occurred)
– AttrVal.instance[3] = ethAggrHDTxIndex (index which indicate the relative number of history
period relative to the current period=0)
– According to the column:
•
AttrVal.oid = OPTICSIM-ETHPM-MIB:: ethAggrHDTxTTF
•
AttrVal.type = Counter64 (64 bits)
•
AttrVal.val = umber of transmitted frames
– or
•
AttrVal.oid = OPTICSIM-ETHPM-MIB:: ethAggrHDTxTTO
•
AttrVal.type = Counter64 (64 bits)
•
AttrVal.val = umber of transmitted octets
– or
•
AttrVal.oid = OPTICSIM-ETHPM-MIB:: ethAggrHDTxTDF
•
AttrVal.type = Counter64 (64 bits)
•
AttrVal.val = umber of discarded frames
– or
•
AttrVal.oid = OPTICSIM-ETHPM-MIB:: ethAggrHDTxSuspectIntervalFlag
•
AttrVal.type = I TEGER
•
AttrVal.val = Truth or False if this interval is suspected to be not correctly & fully collected during all
interval time
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
Performance monitoring per port
Upload PM Information
365-374-201R11.1.1
Issue 1 March 2010