Alcatel-Lucent 1675 Reference Manual page 101

ES64U SNMP MIB description
...................................................................................................................................................................................................................................
MIB field name
alclnkaggAggOperState
alclnkaggAggNbrSelectedPorts
alclnkaggAggNbrAttachedPorts
alclnkaggAggPrimaryPortIndex
alclnkaggAggPrimaryPortPosition
alclnkaggAggRowStatus
...................................................................................................................................................................................................................................
365-374-201R11.1.1
Issue 1 March 2010
(ETS MIB)
alclnkaggAggTable
Description
Link aggregation Admin status
Operational status of the aggregator with
proprietary values
The number of ports selected at the
moment
The number of ports attached at the
moment
The ifIndex of the primary port in the
aggregator used to send BPDUs and
flooding frames. Zero indicates no primary
port is available
The number of the primary port in the
aggregator
This object is the RowStatus (locking flag)
for creating or deleting aggregator objects
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
1+1 LAG - Link Aggregation management
1+1 LAG MIB tables
Value
Read-Write
I TEGER
•
1: enable
•
2: disable
Read-Only
I TEGER
•
1: up
•
2: down
•
3: logicPortCreatFailed
•
4: qReservationFailed
On LACP disable mode, only up and down
are supported
Read-Only
I TEGER (0..10)
Default value: 0.
Read-Only
I TEGER (0..10)
Default value: 0.
Read-Only
Default value is zero ( o primary port
defined).
In use only when LACP is enabled.
Read-Only
I TEGER (0..9)
In use only when LACP is Enabled.
Default value is 0 - (first port).
Read-Write
CreateAnGo, Active, or Destroy
1-89