Ethernet Layer Mib - Alcatel-Lucent 1675 Reference Manual

ES64U SNMP MIB description
...................................................................................................................................................................................................................................

Ethernet Layer MIB

MIB field name
ifIndex
opticsIMEthMauIndex
opticsIMEthJackIndex
opticsIMEthConfEncaps
OpticsIMEthAvailable Bandwidth
(RO)
OpticsIMEthConfVLAN EtherType
(RW)
OpticsIMEthClientType (RW)
opticsIMEthCir OverbookingFactor
(RW)
opticsIMEthEir OverbookingFactor
(RW)
MIB field name
opticsIMEthVLANTypeIndex
opticsIMEthVLANTypeEtherType
opticsIMEthVLANTypeUserLabel
...................................................................................................................................................................................................................................
365-374-201R11.1.1
Issue 1 March 2010
OpticsIMEthConfTable
Description
Index of the table
ot Used
ot Used
ot Used
Indicates the available bandwidth of a
specific port (this value applies to the
value which can be decrease from
opticsIMIfRateLimitedSpeed)
Points to an entry in
opticsIMEthVLA TypeTable that
represents the EtherType value used to
detect VLA tagged frames received
from this interface, as well as to insert
VLA tags to the frames to be
transmitted.
Read only.
Transmission direction of the frames
received from this interface
This attribute defines the overbooking
(OB) factor for the CIR bandwidth.
The overbooking factor is defined as a
percentile.
This attribute defines the overbooking
(OB) factor for the EIR bandwidth. The
overbooking factor is defined as a
percentile.
opticsIMEthVLANTypeTable
Description
Index of the table
(RW)
Define the protocol type (default 0x8100)
(RW)
Define the label for this type
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
Ethernet Layer MIB
Value
A unique value greater than 0
In kbit/s
Minimum value: 1Mbit/s
Default value: 0 Gbit/s
0 means standard EtherType (0x8100
VLA Tag) IEEE 802. 1Q
0 is the default value.
1-ets (sent to ETS Layer)
3-linkagg
0 means unlimited
100 means CIR
101 to 10000 means CIR/100 * (the
value)
0 means unlimited
100 means PIR-CIR
101 to 10000 means (PIR-CIR)/100 * (the
value)
Value
A unique value greater than 0
>0x600 , not including:
Unique field
Interfaces
1-13