Alcatel-Lucent 1675 Reference Manual page 23

ES64U SNMP MIB description
...................................................................................................................................................................................................................................
Object identifier (OID):
1.3.6.1.4.1.637.54.1.25.2.1.1
Full path:
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).alcatel(637).ltt(54).tsdim(1).opticsimEthMib(25).
opticsimEth EMib(2).opticsimEth EMibObject(1).opticsIMEthConfTable(1)
MIB field name
ifIndex
opticsIMEthMauIndex
opticsIMEthJackIndex
opticsIMEthConfEncaps
OpticsIMEthAvailableBandwidth
OpticsIMEthConfVLANEtherType
...................................................................................................................................................................................................................................
365-374-201R11.1.1
Issue 1 March 2010
OpticsIMEthConfTable
Description
Index of the table
ot Used
ot Used
ot Used
(RO)
Indicates the available bandwidth of a
specific port (this value applies to the
value which can be decrease from
opticsIMIfRateLimitedSpeed
Indicates the available bandwidth of a
specific port.
1. This parameter represents the
available BW which can be assigned
for CIR services using this port as
their egress port
2. This parameter is meaningful only
when
opticsIMEthCirOverbookingFactor
is set to a non-zero value.
3. This parameter is decreased by the
CIR value of the traffic descriptors
associated with services using this
port as outflow.
4. Initial Available Bandwidth value is:
•
In case of rate limit = 0
•
Initial value = ifSpeed * (60
/
72)*(CirOverbookingFactor/
100)
•
In case of rate limit ≠ 0
•
Initial value = ifSpeed * (60
/
84)*(CirOverbookingFactor/
100)
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
A unique value greater than 0
In kbit/s
Minimum value: 1Mbit/s
Default value: 0 Gbit/s
)
Interfaces
Generic interface MIB
Value
1-11