1+1 Lag Group Activate - Alcatel-Lucent 1675 Reference Manual

ES64U SNMP MIB description
...................................................................................................................................................................................................................................

1+1 LAG group activate

Configuring a LAG group consists in setting the group
and enabling the group.
The sequence of actions is the following:
...................................................................................................................................................................................................
Set the
1
In order to modify the LAG, the
...................................................................................................................................................................................................
2 Set the
...................................................................................................................................................................................................
Set the
3
Several conditions apply for LAG settings:
•
o other activated (enabled) LAG should contain the same
• Exactly two ports in
ActorAdminKey
• The two ports members should:
– Be in
– Have the same following configured parameters (unspecified values should be
• Once the LAG state is set to E ABLE, the ports
read-only field) is set from configurable(2) to attached(6).
The sequence of operations is detailed in the next table:
1 Set
2 Set
...................................................................................................................................................................................................................................
365-374-201R11.1.1
Issue 1 March 2010
alclnkaggAggActorAdminKey
alclnkaggAggName
alclnkaggAggAdminState
alclnkaggAggPortTable
.
ifAdminStatus
equal in member ports):
– ( ) = 6-ethernetCsmacd
ifType IfTable
– ( )
ifMTU ifTable
–
opticsIMEthClientType
–
opticsIMIfRateLimitedSpeed
I ARG OpticIMCsgVar::AttrVal
•
AttrVal.instance[0] = interface ifIndex
•
AttrVal.oid = alclnkaggAggTable:: alclnkaggAggActorAdminKey
•
AttrVal.type = I TEGER
•
AttrVal.val = The current administrative value of the Key for the Aggregator
I ARG OpticIMCsgVar::AttrVal
•
AttrVal.instance[0] = interface ifIndex
•
AttrVal.oid = alclnkaggAggTable:: alclnkaggAgg ame
•
AttrVal.type = STRI G
AttrVal.val = ame of the aggregator
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
in
alclnkaggAggTable
alclnkaggAggAdminState
in
alclnkaggAggTable
in
alclnkaggAggTable
1-up.
(
OpticsIMEthConfTable
(
opticsIMIfTable
1+1 LAG - Link Aggregation management
1+1 LAG group activate
, the
ActorAdminKey
to the desired KEY.
should be DISABLE.
.
to E ABLE.
ActorAdminKey
should contain the same
) = 3-linkagg
).
alclnkaggAggPortState
AggName
.
(a
1-91