Inflow Mirror Flag - Alcatel-Lucent 1675 Reference Manual

ES64U SNMP MIB description
...................................................................................................................................................................................................................................

Inflow mirror flag

Set inflow mirror flag for inflow consists of executing the following action:
The sequence of actions is the following:
...................................................................................................................................................................................................
1 Set the inflow mirror flag in the
The sequence of operations is detailed in the next table:
1 Set
ote:Before the change of inflow mirror make sure:
1. The RowStatus of the cross-connection connected to specified inflow in
2. nn MXOpticsExtETSOuflowMirror for outflow connected to the
E
N D O F
...................................................................................................................................................................................................
...................................................................................................................................................................................................................................
1-78
I ARG OpticIMCsgVar::AttrVal
•
AttrVal.instance[0] = InFlowIndex
•
AttrVal.oid = nn MXxMplsIf:: nn MXOpticsExtETSInflowMirror
•
AttrVal.type = I TEGER
•
AttrVal.val = enabled (1) / disabled (2). default value – 2
opticsIMETSCrossConnectTable is active.
cross-connection is disabled.
S T E P S
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
nnNMXOpticsExtETSInflowMirrorTable
Service mirroring management
Inflow mirror flag
.
365-374-201R11.1.1
Issue 1 March 2010