Prestored Configurations - Telebit WorldBlazer User Manual

Prestored Configurations
A
90257-01
The W orldBlazer modem provides you with several
prestored configurations. You can select configurations
by using the AT &Fn command, where n is the number of
the stored configuration you have selected. After you
select a configuration, you can use AT & V to display the
configuration on the screen.
To select a prestored configuration from the front panel of
the modem, use the TID and AlB switches. The LEDs
provide a visual display of the configuration selected (see
Table A-I). Table A-I also shows you how to select some
of the prestored configurations from the front panel or by
using the &F commands.
The following sections give suggested uses for each
configuration, the appropriate &F command, and a screen
display for that configuration. The commands and S
registers that have been changed from &FO are shown in
boldface type for easy reference. S registers that have
been changed from the &FO factory default have a colon
instead of an equal sign.
Presto red Configurations
A-1