Using The Tid Switch; Performing A Reset; Using The Auto-Answer Feature; Connecting During A Phone Conversation - Telebit WorldBlazer User Manual

Using the TID Switch
If you set the S lO4 register to 3, pressing the T
/D
switch
automatically dials the first or second number in the
number directory, depending on the current setting of the
AlB switch. When the AlB switch is set to A, the modem
dials the first number
(~NO);
if the switch is set to B, the
modem dials the second number
(~NI).
Performing a Reset
To perform a modem reset, press the AlB switch.
Using the Auto-Answer Feature
The modem automatically answers an incoming call after
a specified number of rings and attempts to connect to the
remote modem. If the modem does not detect an originate
signal within a specified period of time, or if you send any
character from your DTE before the modems establish a
communication link, the modem sends a
NO CARRIER
result code.
If the modem detects a carrier, it sends a
CONNECT
result
code indicating the successful connection and, depending
on the X command setting, the speed of the connection or
the serial interface.
Connecting During a Phone Conversation
90257-01
If you are talking on the telephone and then want to use
your computer to communicate with the remote location's
computer, use the Dial (D) and Answer (A) commands.
1. Have the other party enter AT D to their modem
without entering a telephone number.
The Basics 3-11