Save & Exit - Nexcom 912P User Manual

Chapter 3: BIOS Setup
Quiet Boot
Enabled Displays OEM logo instead of the POST messages.
Disabled Displays normal POST messages.
Boot Option Priorities
Adjust the boot sequence of the system. Boot Option #1 is the first boot
device that the system will boot from, next will be #2 and so forth.
Fast Boot
When enabled, the BIOS will shorten or skip some check items during POST.
This will decrease the time needed to boot the system.
New Boot Option Policy
Controls the placement of newly detected UEFI boot options.
Onboard LAN PXE
Enables or disables onboard LAN PXE ROM.
Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.
Save & Exit
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Main Advanced Chipset
Save Options
Save Changes and Reset
Discard Changes and Reset
Default Options
Restore Defaults
Boot Override
UEFI: Built-in EFI Shell
Launch EFI Shell from filesystem device
Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.
Save Changes and Reset
To save the changes and reset, select this field then press <Enter>. A dialog
box will appear. Confirm by selecting Yes.
Discard Changes and Reset
To exit the Setup utility without saving the changes, select this field then
press <Enter>. You may be prompted to confirm again before exiting.
Restore Defaults
To restore the BIOS to default settings, select this field then press <Enter>. A
dialog box will appear. Confirm by selecting Yes.
37
Security Boot Save & Exit
Reset the system after saving
the changes.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NEX 912P User Manual