Save & Exit - Nexcom COM Express Type 6 ICES 673 User Manual

Chapter 4: BIOS Setup
Quiet Boot
Enabled Displays OEM logo instead of the POST messages.
Disabled Displays normal POST messages.
Boot Option Priorities
Adjust the boot sequence of the system. Boot Option #1 is the first boot
device that the system will boot from, next will be #2 and so forth.
Fast Boot
Enables or disables fast boot technology to speed up the system boot time.
This is achieved by skipping specific tests during BIOS POST routine.
Onboard LAN PXE
Enables or disables the onboard LAN PXE ROM.
Hard Drive BBS Priorities
Sets the order of the legacy devices in this group.
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
Save & Exit
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Main Advanced Chipset
Save Changes and Reset
Discard Changes and Reset
Restore Defaults
Boot Override
UEFI: Built-in EFI Shell
MMC - DS2016
Launch EFI Shell from filesystem device
Version 2.17.1254. Copyright (C) 2016 American Megatrends, Inc.
Save Changes and Reset
To save the changes and reset, select this field then press <Enter>. A dialog
box will appear. Confirm by selecting Yes.
Discard Changes and Reset
To exit the Setup utility without saving the changes, select this field then
press <Enter>. You may be prompted to confirm again before exiting.
Restore Defaults
To restore the BIOS to default settings, select this field then press <Enter>. A
dialog box will appear. Confirm by selecting Yes.
Boot Override
To bypass the boot sequence from the Boot Option List and boot from a
particular device, select the desired device and press <Enter>.
40
Security Boot Save & Exit
Reset the system after saving
the changes.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
ICES 673 User Manual